Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 277)

Brocade Network Advisor SAN + IP User Manual 211
53-1002949-01
Software Configuration
6
8. Select the DoPostdeploymentBackup check box to turn on product configuration backup after
a payload is deployed using the Configuration Wizard.
9. Select the DoPredeploymentBackup check box to turn on product configuration backup before
a payload is deployed using the Configuration Wizard.
10. Enter the number of days to keep product configuration backup files on the server in the
KeepDataForDays field.
Minimum duration is 7 days. Maximum duration is 365. Default is 30.
Reducing this parameter may result in expiring a large number of records on server restart and
lead to reduced performance. If millions of records are impacted, this might last several hours.
11. Click Apply or OK to save your work.
Configuring custom report preferences
1. Select Server > Options.
The Options dialog box displays.
2. Select IP Preferences from the Software Configurations list in the Category pane.
3. Enter the maximum number of records to display in HTML Reports in the MaxRecordsToDisplay
field.
By default, 1000 records display, even if the event count is greater than 1000. You can enter a
value of from 10 (minimum) through 2000 (maximum) records.
4. Enter the maximum number of records to obtain from the database in the
MaxRecordsToFromDatabase field.
5. Click Apply or OK to save your work.
Configuring deployment preferences
1. Select Server > Options.
The Options dialog box displays.
2. Select IP Preferences from the Software Configurations list in the Category pane.
3. Enter the number of days to retain deployment records in the Expiration.DaysToKeep field.
Minimum is 1. Maximum is 366. Default is 180.
4. Click Apply or OK to save your work.
Configuring deployment report preferences
1. Select Server > Options.
The Options dialog box displays.
2. Select IP Preferences from the Software Configurations list in the Category pane.