Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 1418)

Brocade Network Advisor SAN + IP User Manual 1369
53-1002949-01
VPLS Manager
37
FIGURE 603 VPLS Configuration wizard Deploy Target Action dialog box
The VPLS instance name and VCID are shown in the Name and VCID fields.
Deploying target actions using VPLS Manager
1. From the Deploy Target Actions pane, the Endpoint Targets column lists the names and IP
addresses of the devices to which the VPLS instance will be deployed. Expand the folder for a
device to display any VLANs and ports to which the VPLS instance will be deployed.
The Actions column displays the action that will be taken when the VPLS instance is deployed
to the devices. Possible actions are:
• CREATE: Adds the configuration to the device.
• DELETE: Removes the configuration from the device.
• UPDATE: Modifies the configuration on the device if the configuration is being edited.
• NOOP: No change is required.
2. Click Next.
The Deployment Properties page displays ( Figure 604 ).