Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 1557)

1510 Brocade Network Advisor SAN + IP User Manual
53-1002949-01
IP real-time performance monitoring
43
8. Click OK.
The Real Time Graphs/Tables dialog box displays.
Removing measures from ports
To remove measures from ports, complete the following steps.
1. Right-click a device and select Performance > Real Time Graph/Table.
The Real Time Graphs/Tables dialog box displays.
2. Select Products from the Show list.
The available products display in a list.
3. Expand the list and select a port in the list and click Measures.
The Select measures - Real Time Graphs/Tables dialog box displays.
4. Select Port Measures from the Show list.
5. To remove an MIB or expression from the port, complete the following steps.
a. Select the MIB or expression you want to remove from the port in the Selected Measures
list.
Select multiple MIBs and expressions by holding down the CTRL key and clicking more
than one MIB or expression.
b. Click the left arrow button to remove them from the Selected Measures list.
6. Click OK.
The Real Time Graphs/Tables dialog box displays.
Adding collectibles to monitoring
NOTE
You cannot select more than 20 collectors at a time.
To add collectibles to performance monitoring, complete the following steps.
1. Add all collectibles defined for a device by completing the following steps.
a. Select Show > Products to show devices on the network that are being polled for
collectible data.
b. Select the product you want to include in performance in the tree. Press CTRL and click to
select multiple products.
c. Click the right arrow button.
The graph and table are populated with the collectible performance values. All collectibles
defined for the selected product display beneath the graph.
2. Add all collectibles defined for a port by completing the following steps.
a. Select Show > Products to show devices on the network that are being polled for
collectible data.