Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 1285)

1234 Brocade Network Advisor SAN + IP User Manual
53-1002949-01
Configuration snapshots
32
FIGURE 529 Configuration Repository dialog box - Configuration Snapshots tab
The Configuration Snapshots tab displays the following information:
• Product Name — The name of the product
• Product Snapshots — The product snapshots
• Date — The date when the snapshot file was stored in the server
• Snapshot Type — The type of snapshot generated. There are three types:
 Manual: Generated manually by clicking the Save Snapshot button on the Backup
Configuration Manager.
 Pre-Snapshot: Generated before the new configuration was deployed to the device.
 Post-Snapshot: Generated after the new configuration was deployed to the device.
• CLI Template — The name of the snapshot template used for the pre- or post-snapshot
deployment.
• Status — The snapshot status
4. Click the following buttons to access the corresponding dialog boxes:
• Search button — Click to launch the Search Pre/Post Snapshots dialog box, which allows
you to search the contents of snapshots in the repository of the management server. Refer
to
“Searching the configuration repository” on page 1229 for more information.
• Compare button — Select two snapshots (same product or two different products) and
click to launch the Comparison dialog box.
If you select two snapshots from the Configuration Snapshots list and click Compare, the
differences between the two configurations are highlighted.
• View button — Select a row in the Configuration Snapshots list and click to display the
contents of the selected snapshot.