Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 1337)

1288 Brocade Network Advisor SAN + IP User Manual
53-1002949-01
Products supporting the image import
35
Products supporting the image import
Table 132 lists the products that support the boot images, software images, and unified images.
Boot image management
Management of boot and monitor images from IronWare and Network OS products can be done
using the following Management application modules:
• Firmware Management — Manually imports boot images into the Management application.
This module also allows you to delete boot images from the Management application.
• Configuration Wizard — Deploys boot and monitor images that are available in the
Management application to IronWare and Network OS products. The Configuration
Management privilege is required to deploy boot and monitor images using the Configuration
Wizard.
Viewing the list of boot images
You can view a list of boot and monitor images that are known to the Management application from
the Boot Images tab of the Firmware Management dialog box if you have the Firmware
Management privilege in your Management application user account or role.
The Boot Images tab lists the boot or monitor images in the Management application and contains
the following buttons:
TABLE 132 Products supporting the image import
Image type Products supported
Boot images
•
Ethernet chassis
•
Ethernet routers
•
Terathon (BigIron MG8, NetIron 40G, NetIron IMR 640)
•
Ethernet switches and Data Center switch
•
ServerIron, ServerIron ADX
•
IP Encryption switch
•
IronPoint FES
Software images
•
Ethernet chassis
•
Ethernet routers
•
Terathon (BigIron MG8, NetIron 40G, NetIron IMR 640)
•
ServerIron, ServerIron ADX
•
IP Encryption switch
•
Ethernet switches and Data Center switch
•
EdgeIron 4802CF, 48G, 48GS, and 8x 10G
•
IronPoint FES
Unified images
•
Ethernet chassis (release 02.2.01)
•
Ethernet routers (Ethernet Edge router release 03.5.00-application images only)
•
Terathon (BigIron MG8, NetIron 40G, NetIron IMR 640), (release 02.3.00)
•
VDX switches (release 2.1.0 and later)
•
NetIron Simplified XMR/MLX and CES/CER (release 5.3.0 and later)