Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 1288)

Brocade Network Advisor SAN + IP User Manual 1237
53-1002949-01
Configuration snapshots
32
FIGURE 531 Configuration Snapshot Report dialog box
5. Select the start date and end date of the configuration snapshots you want to view.
6. Click Find.
The Management application displays the list of snapshots that match the start date and end
date you specified.
7. You can expand each tree node to view details about the configuration snapshot. Expand the
configuration snapshot name under the Device Configuration column to display the list of
configuration snapshots that have been recorded for that device configuration.
8. Expand a specific configuration snapshot folder to display the status of each record. Status
can be one of the following:
• Not Applicable
• Change — The device configuration deployment included both pre- and post-configuration
snapshot options. There is a difference between the pre-configuration snapshot and the
post- configuration snapshot.
• No Change — The device configuration deployment included pre-configuration and
post-configuration snapshots. There is no difference between the two snapshots.
• Error — An error was encountered in one or more devices during the deployment of the
snapshots. The devices where the error occurred are listed under the Error status.
NOTE
Click the Stop button to stop running the configuration snapshot report.