Configuring a daily deployment schedule, Configuring a weekly deployment schedule – Brocade Network Advisor SAN + IP User Manual v12.1.0 User Manual
Page 1688
1644
Brocade Network Advisor SAN + IP User Manual
53-1002949-01
Schedule PoE power deployment
46
Configuring a daily deployment schedule
To configure a daily deployment schedule, complete the following steps.
1. Select Daily from the Frequency list.
2. Select the time of day you want deployment to run from the Time (hh:mm) lists.
Where the hour value is from 1 through 12, the minute value is from 00 through 59, and the
day or night value is AM or PM.
To finish configuring the deployment schedule, return to one of the following procedures:
•
To configure an enable PoE schedule, refer to
•
To configure an disable PoE schedule, refer to
of
•
To update a PoE schedule, refer to
“Updating a power deployment schedule”
Configuring a weekly deployment schedule
To configure a weekly schedule, complete the following steps.
1. Select Weekly from the Frequency list.
2. Select the time of day you want deployment to run from the Time (hh:mm) lists.
Where the hour value is from 1 through 12, the minute value is from 00 through 59, and the
day or night value is AM or PM.
3. Select the day you want deployment to run from the Day of the Week list.
To finish configuring the deployment schedule, return to one of the following procedures:
•
To configure an enable PoE schedule, refer to
•
To configure an disable PoE schedule, refer to
of
•
To update a PoE schedule, refer to