Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 230)

Brocade Network Advisor SAN + IP User Manual 163
53-1002949-01
Port Groups
5
4. Click OK to close the dialog box.
Deleting a port group
You can delete more than one group at a time.
To delete a port group, complete the following steps.
1. Select Network Objects from the view list on the Product List toolbar.
2. Right-click the port group you want to delete in the Product List and select Delete Group.
Ctrl and click to select more than one group to delete.
A confirmation message displays.
3. Click Yes.
The group is deleted from the Ports Groups folder of the Product list.
MAC Address The MAC Address of the port.
Port Status The status of the port.
Port State The state of the port.
Type The port type.
Speed The Speed of the port.
L2/Tag Mode Indicates whether L2 tag mode is enabled or disabled. If enabled,
indicates whether the port is tagged, untagged, or dual.
Untagged VLAN ID The untagged VLAN identifier of the port.
Duplex Mode The duplex mode of the port, such as auto-sense, full-duplex, or none.
Stacking Port Whether or not the port stacked.
Role The role of the device, such as Edge.
Product The name of the product.
User_defined_property (up to 3) A user-defined port property value. You can create up to 3 user-defined
properties (refer to
“Properties customization” on page 1990).
TABLE 29
Field/Component Description