Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 1265)

1214 Brocade Network Advisor SAN + IP User Manual
53-1002949-01
Element Manager interface overview
31
Table 125 describes the properties of the VLAN View.
Comparing physical port properties
You can compare multiple physical port properties, for example, a healthy port with an offline port..
1. From Port View or Table View, select two or more ports (press Ctrl and click each port).
2. Right-click one of the selected ports, and select Properties.
FIGURE 516 Physical port properties
For example, in Figure 516 , ports 3/1, 3/2, and 3/4 are selected. The selected port properties
display in the Port Properties dialog box and the order of port selection is also retained, as shown
in
Figure 517 .
TABLE 125 VLAN View - port properties
Field/Component Description
Identifier The identifier of the port.
Name The name of the VLAN or port.
Type The type of the port.
Port Mode Indicates the tag mode of the port.
•
Tagged represents the port is in dual mode but is in the tagged state for that
particular VLAN.
•
Untagged represents the port is untagged for that particular VLAN.
•
The third port mode is Dual mode.
QoS The Quality of Service (QoS) to assign traffic priority (high, medium, or low) for a given
source and destination traffic flow.
STP Type The type of Spanning Tree Protocol (STP) - STP, RSTP, and None.
STP Status Indicates whether STP is enabled or disabled.
Virtual/Routing Interface The virtual routing interface number. You can add an IP address to the virtual routing
interface once the VLAN is deployed.
Path Cost The STP cost of using the port to reach the root bridge.
Transparent VLAN
Flooding The enabled or disabled status of transparent VLAN flooding. Enabled status allows
the packets to be forwarded without any form of CPU intervention including MAC
learning and MAC destination lookups.
Port Priority The preference that STP gives this port relative to other ports for forwarding traffic out
of the spanning tree.
Role The role of the port. Possible values include the following roles:
•
MCT
•
ICL