Brocade Network Advisor SAN + IP User Manual v12.1.0 User Manual
Page 708
650
Brocade Network Advisor SAN + IP User Manual
53-1002949-01
Adapter software
19
FIGURE 229
Adapter Software dialog box, Driver tab
2. Select one or more hosts from the Available Hosts list and click the right arrow button to move
the selected hosts to the Selected Hosts list.
The Available Host list displays the following information for hosts that are discovered through
the HCM agent with driver version 2.3.0.0 or later:
•
Hosts — The IP address of the host.
•
Name — The name of the host. The first three digits indicate the host’s operating system;
for example, WIN or LIN.
•
Operating System — The host operating system; for example, Microsoft Windows or Red
Hat Linux.
•
Driver Version — The host’s current driver version.
•
Architecture — The host’s architecture; for example, 32-bit or 64-bit.
3. Select one or more hosts from the Selected Hosts list. You can select mutliple hosts, but if the
selected host count is greater than 20, a batch of 20 hosts is initiated for the driver update
first and the remaining hosts are queued.
The Selected Hosts list displays the following information for hosts that have been selected for
the driver update:
•
Host — The IP address of the host.
•
Operating System — The host operating system; for example, Microsoft Windows or Red
Hat Linux.
•
Driver to Update — Select the driver to update from the list.
•
Status — The ready status of the selected host.
•
Architecture — The host’s architecture; for example, 32-bit or 64-bit.
•
Current Driver Version — The host’s current driver version.
•
Message — Additional information pertaining to the selected host.