Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 218)

Brocade Network Advisor SAN + IP User Manual 151
53-1002949-01
Product group overview
5

Product Type

Serial #

Status

Vendor

Model

Firmware

Build Label

Location

Contact

Description

User_defined_property1 (up to 3)
Static product groups
You can define a static product group by selecting the product you want to include in the group.
Creating a static product group
To create a product group, complete the following steps.
1. Select Network Objects from the view list on the Product List toolbar.
2. Select Add Product Group > Static from the Grouping list on the Product List toolbar.
The Add Product Group dialog box displays.
FIGURE 58 Add Product Group dialog box
3. Enter a unique name (maximum 64 characters) for the product group in the Name field.
4. Enter a description (maximum 255 characters) for the product group in the Description field.
5. Select the Topology Display Enable check box to display the product group in theL2 Topology
view.