Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 1554)

Brocade Network Advisor SAN + IP User Manual 1507
53-1002949-01
IP real-time performance monitoring
43
TABLE 143 Collection status icons
• Last Value - The last (most current) value collected.
• Last Time Polled - The time that the collector was last polled.
10. Click Sources to add products and ports to or remove products and ports from real-time
performance monitoring. Refer to “Adding products and ports to real-time performance” on
page 1507 and “Removing products and ports from real-time performance” on page 1507.
11. Click Close to close the dialog box.
Adding products and ports to real-time performance
To add products and ports to real-time performance monitoring, complete the following steps.
1. Click Sources from the Real Time Graphs/Tables dialog box.
2. Select the products you want in the Available Products list and click the right arrow button to
move them to the Selected Products list.
NOTE
You cannot select more than 100 products and ports.
3. Select the ports you want in the Available Ports list and click the right arrow button to move
them to the Selected Ports list.
4. Click OK.
The Real Time Graphs/Tables dialog box displays.
Removing products and ports from real-time performance
To remove products and ports from real-time performance monitoring, complete the following
steps.
1. Click Sources from the Real Time Graphs/Tables dialog box.
2. Select the products you want to remove in the Selected Products list and click the left arrow
button to move them to the Available Products list.
3. Select the ports you want to remove in the Selected Ports list and click the left arrow button to
move them to the Available Ports table.
4. Click OK.
Failed. No value was ever collected for this collectible.
Warning: Data collection failed in the last polling cycle.
Successful: Last collection successful.
Scheduled but not currently active.