Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 1374)

Brocade Network Advisor SAN + IP User Manual 1325
53-1002949-01
LSP
37
• Setup priority for the LSP.
• Metric for the LSP.
• Whether the LSP includes or excludes links belonging to specified administrative groups.
Viewing LSP Admin Group information
MPLS interfaces on an LSP can be organized into administrative groups (admin groups). LSP admin
groups are typically used to manage CSPF path selection by including or excluding network
segments identified as admin groups. Take the following steps to view LSP admin groups.
1. Select Configure > MPLS > LSP.
2. Select the Admin Groups tab ( Figure 566 ).
FIGURE 566 LSP dialog box, Admin Groups tab
3. Use the View selector to choose between displaying by Product or Admin Group ID.
- Product - The product view shows a tree structure under Products/Admin Groups with
products at the top level. Click the product name to expand the tree and display any
associated admin groups.
- ID - The ID view groups admin group instances by admin group ID. An admin group
instance may be configured in multiple products, so the same product may be displayed
under different admin group IDs.
4. Select a product or ID in the tree structure. The admin group name, ID, and product name
display in the Name, ID, and Product fields, and the interfaces in the admin group display
under Ports.