Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 1375)

1326 Brocade Network Advisor SAN + IP User Manual
53-1002949-01
LSP
37
Viewing LSP path information
An LSP path is a list of router hops across an MPLS domain. Paths are configured separately from
LSPs. This allows paths to be used by any LSP that knows the path name. Take the following steps
to view LSP paths.
1. Select Configure > MPLS > LSP.
2. Select the Paths tab ( Figure 567 ).
FIGURE 567 LSP dialog box, Paths tab
3. A tree structure displays under Products/Paths with products at the top level. Click the product
name to expand the tree and display any associated paths.
4. Select a path to display the path name in the Name field, the Product name in the Product
field, and the Hop Details. The Hop Details include the following:
- Hop IP Address - The IP addresses for all the defined hops are listed.
- Hop Type - Either Strict or Loose. Strict means that the node must be directly connected to
the previous node on the Hop Details list. Loose, means that there may be one or more
hops between the previous node on the Hop Details list.