Brocade Network Advisor SAN + IP User Manual v12.1.0 User Manual
Page 1828
Brocade Network Advisor SAN + IP User Manual
1787
53-1002949-01
MAPS interoperability with other features
50
•
Frame Monitor — Only displays switches that do not have MAPs-enabled. A “None of the Fabric
Watch specific operations can be performed on this switch because the MAPS (Monitoring and
Alerting Policy Suite) are enabled.” error message displays.
•
Performance Thresholds — Only displays switches that do not have MAPs-enabled. A “None of
the Fabric Watch specific operations can be performed on this switch because the MAPS
(Monitoring and Alerting Policy Suite) are enabled.” error message displays.
•
Port Optics — Displays port optic details. For Fabric OS products running 7.2.0 or later, displays
combined status and allows threshold-based monitoring.
•
Call Home — Does not generate Fabric Watch events from MAPs-enabled switches. Therefore,
does not generate Call Home notification for existing Fabric Watch events. You must configure
the new MAPs Call Home event (MAPS-1021) to receive the Call Home message.
•
Fabric Watch dashboard support — The MAPS dashboard widgets display the number of MAPS
threshold violations for all network objects (such as ports, trunks, switches, and circuits) for all
MAPS-capable devices. In addition, the MAPS dashboard widgets include the Fabric Watch
threshold violations for devices with the Fabric Watch license or FC devices running Fabric OS
7.2.0 or later with the Fabric Vision license but not migrated to MAPS.
The Fabric Watch support only applies to the following widgets and dialog box:
•
Out of Range Violations widget (refer to
“Out of Range Violations widget”
•
Port Health Violations widget (refer to
“Port Health Violations widget”
•
Violations dialog box (refer to
details the supported RAS log event identifiers that display in the MAPS dashboard
widgets and the Violations dialog box.