Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 222)

Brocade Network Advisor SAN + IP User Manual 155
53-1002949-01
Product group overview
5
• Build Label
• Location
• Contact
• Description
• User_defined_property1 (up to 3)
8. Select one of the following from the Operator list.
• Equals (valid for Regular Expression or Value type)
• Not Equals (valid for Regular Expression or Value type)
• Starts With (only valid for Value type)
Not available if you select Status or Product Type from the Property list.
• Ends With (only valid for Value type)
Not available if you select Status or Product Type from the Property list.
• Contains (only valid for Value type)
Not available if you select Status or Product Type from the Property list.
• Does not contain (only valid for Value type)
Not available if you select Status or Product Type from the Property list.
9. Enter a value or regular expression in the Value/Regular Expression cell.
This field is case sensitive.
If you selected Status from the Property list, the following predefined values are populated in
the Value/Regular Expression cell:
• Reachable
• Not Reachable
• Down
• Healthy
• Marginal
• Degraded Link
• Unhealthy
If you selected Product Type from the Property list, the following predefined values are
populated in the Value/Regular Expression cell:
• L2 Switch
• Load Balancer
• Router
• Wireless Controller
• Wireless Standalone AP
To fetch products that have an empty value for a property, select the operator Equals from the
Operator list and leave the Value/Regular Expression field blank.