Brocade Network Advisor SAN + IP User Manual v12.1.0 User Manual
Page 1695
Brocade Network Advisor SAN + IP User Manual
1651
53-1002949-01
PoE thresholds
46
FIGURE 718
Thresholds dialog box
3. Choose one of the following measures:
•
PoE Capacity (The product must be running agent version 7.2.2 or later.)
•
PoE Allocation
•
Allocation % (The product must be running agent version 7.2.2 or later.)
•
PoE Consumption
•
Consumption %
•
Allocations Count (The product must be running agent version 7.2.2 or later.)
4. Select one of the following from the Conditions list:
•
>
•
<
•
==
5. Enter the number of events that must be generated to trigger the threshold event in the Value
field.
The value should not exceed the capacity of the product.
If you select a percentage measure, the value should be less than or equal to 100.
6. Select the severity level for the threshold event from the Severity list.
•
Info
•
Warning
•
Critical