Allied Telesis AT-S63 - Manual (Page 108)

Chapter 4: AT-9400Ts Stack Commands
108 Section I: Basic Operations
 Priority - The priority number of a switch. The range is 1 to 16. The
lower the number, the higher the priority. To set this value, refer to
“SET STACK” on page 104. This value only applies when the ID
numbers are set automatically.
 Mac Address - The MAC address of a switch.
Example
show stack
AlliedWare Plus
Command
Syntax
show stack
Modes
User Exec mode and Privileged Exec mode
Description
This AlliedWare Plus command is equivalent to the standard command.
Example
awplus# show stack