Allied Telesis AT-S63 - Manual (Page 516)

Chapter 30: SNMPv3 Commands
516 Section IV: SNMPv3
Note
In the above example, the storage type has not been specified. As a
result, the storage type for the hwengineering security group is
volatile storage.
AlliedWare Plus
Command
Syntax
snmp-server group access secure noauth|auth|priv read
readview write writeview notify notifyview model=v1|v2c|v3
Mode
Configure mode
Description
This command differs from the standard command as follows:
 This command uses the keyword GROUP instead of ACCESS.
 You cannot define the storage type. New entries are automatically
assigned the storage type of nonvolatile.
 You must include all of the parameters.
 The parameters must be entered in the order shown above.
Example
This example creates a security group called “sta5west” with a security
model of SNMPv3 and a security level of privacy. The security group has
a read view named “internet,” a write view named “private,” and a notify
view named “internet:”
snmp-server group sta5west secure priv read internet write
private notify internet model v3