Allied Telesis AT-S63 - Manual (Page 119)

AT-S63 Management Software Command Line User’s Guide
Section I: Basic Operations 119
Description
This command is used to identify the IP address of a SNTP server. The
SNTP client is automatically activated after you enter this command. With
the other management interfaces you have to use different commands to
define the IP address of the server and to activate the client.
Example
This example defines the IP address of the SNTP server as 148.77.122.54
and activates the client:
awplus> enable
awplus# configure terminal
awplus(config)# ntp server 148.77.122.54