Disable glc, Alliedware plus command – Allied Telesis AT-S63 User Manual
Page 436
Advertising
Chapter 22: Group Link Control Commands
436
Section II: Advanced Operations
DISABLE GLC
Syntax
disable glc
Parameters
None.
Description
This command is used to disable group link control on a switch or a stack.
Here are a few guidelines:
The defined groups remain, but the feature is disabled.
The ports of the groups forward traffic normally, including any disabled
downstream ports.
Example
This command disables group link control:
disable glc
AlliedWare Plus
Command
The AlliedWare Plus NO GROUP LINK CONTROL command
automatically disables the feature when you delete the last group on a
switch or a stack. For instructions, refer to the AlliedWare Plus command
in “DESTROY GLC” on page 434.
Command
Available
AlliedWare Plus
Advertising