Allied Telesis AT-S63 - Manual (Page 213)

AT-S63 Management Software Command Line User’s Guide
Section I: Basic Operations 213
Description
This AlliedWare Plus command is used both to remove ports from static
port trunks and to delete trunks. A trunk is automatically deleted when you
remove all of its ports.
Example
These commands remove ports 22 and 23 from a port trunk that has the
TGID number 4. The trunk is deleted if these are the only ports in the
trunk:
awplus> enable
awplus# configure terminal
awplus(config)# interface 22-23
awplus(config-if)# no static-channel-group 4