Allied Telesis AT-S63 - Manual (Page 272)

Chapter 15: File System Commands
272 Section II: Advanced Operations
SHOW FILE
Syntax
show file[=[cflash:] filename.ext ]
Parameter
file Specifies the name of the file to be displayed. Use
double quotes to enclose the name if it contains
spaces. Otherwise, the quotes are optional. To view
a file on a flash memory card, precede the name with
“cflash”.
If you do not specify a file name, the command lists
all the files in the flash memory as well as on a
compact flash card, if one is installed in the switch.
Description
This command lists the files in the switch’s file system. You can use the
wildcard “*” to replace any part of the filename to allow a more selective
display.
You can also use this command to view the contents of a configuration
file.
Examples
The following command displays all the files in the switch’s file system and
the current directory of the flash memory card:
show file
The following command displays all the configuration files on the switch:
show file=*.cfg
The following command displays the contents of the configuration file
sw12.cfg in the switch’s file system:
show file=sw12.cfg
The following command displays the contents of the configuration file
boot.cfg on a compact flash card:
show file=cflash:boot.cfg
Command
Available
AlliedWare Plus