Allied Telesis AT-S63 - Manual (Page 658)

Chapter 34: Port-based VLAN, Tagged VLAN, and Multiple VLAN Mode Commands
658 Section VI: Virtual LANs
SET VLAN
Syntax
set vlan= name [vid= vid ] type=portbased
Parameter
vlan Specifies the name of the dynamic GVRP VLAN you
want to convert into a static VLAN. To view VLAN
names, refer to “SHOW VLAN” on page 659.
vid Specifies the VID of the dynamic VLAN. To view
VIDs, refer to “SHOW VLAN” on page 659. This
parameter is optional.
type Specifies the type of static VLAN to which the
dynamic VLAN is to be converted. There is only one
option: PORTBASED.
Description
This command converts a dynamic GVRP VLAN into a static tagged
VLAN. You can perform this command to permanently retain the VLANs
the switch learned through GVRP.
Note
This command cannot convert a dynamic GVRP port in a static
VLAN into a static port. For that you must manually modify the static
VLAN, specifying the dynamic port as either a tagged or untagged
member of the VLAN.
Example
This command changes the dynamic VLAN GVRP_VLAN_22 into a static
VLAN:
set vlan=gvrp_vlan_22 type=portbased