Allied Telesis AT-S63 - Manual (Page 799)

AT-S63 Management Software Command Line User’s Guide
Section VIII: Port Security 799
Mode
Port Interface mode
Description
This command lets you set ports to the limited security mode. You cannot
use the AlliedWare Plus commands to set ports to the Secured or Locked
security mode.
Example
This example sets port 2 to the limited security mode and configures the
maximum number of MAC addresses the port can learn to 15:
awplus> enable
awplus# configure terminal
awplus(config)# interface 2
awplus(config-if)# switchport port-security maximum 15