Enable mgmtacl – Allied Telesis AT-S63 User Manual
Page 905
Advertising
AT-S63 Management Software Command Line User’s Guide
Section IX: Management Security
905
ENABLE MGMTACL
Syntax
enable mgmtacl
Parameters
None.
Description
This command activates the Management ACL.
Note
You will not be able to remotely manage the switch from a Telnet or
web browser management session, or ping the device, if you
activate the Management ACL before you enter the access control
entries (ACEs).
Example
The following command activates the Management ACL:
enable mgmtacl
Advertising