Alliedware plus command – Allied Telesis AT-S63 User Manual

Page 789

Advertising
background image

AT-S63 Management Software Command Line User’s Guide

Section VII: Internet Protocol Routing

789

Example

This example displays the information about virtual router 16:

show vrrp=16

AlliedWare Plus

Command

Syntax

show vrrp

Modes

User Exec mode and Privileged Exec mode

Step Value

If a number is displayed, this is the value by
which the priority of the virtual router is
reduced by each VLAN port that fails or is
disabled. If “Proportional” is shown, the
priority is reduced in proportion to the
percentage of VLAN ports that are out of
service.

Port Reset

Whether port reset is on. When on, the ports
of a VLAN that has a virtual router are reset
when a virtual router transitions from backup
to master status.

Monitored Interfaces

Interface

The name of an interface being monitored by
VRRP for this virtual router.

New Priority

The new priority that the switch uses when
this interface becomes inoperative.

Counters

Good Advertisements
Received

Number of acceptable advertisement packets
received by the switch for this virtual router.

Bad Advertisements
Received

Number of unacceptable advertisement
packets received by the switch for this virtual
router.

Master Periods

Number of periods when the switch has been
the master switch.

Advertisements Sent

Number of advertisement packets sent by the
switch.

Table 26. SHOW VRRP Command Information (Continued)

Section

Parameter

Description

Advertising