Allied Telesis AT-S63 - Manual (Page 721)

AT-S63 Management Software Command Line User’s Guide
Section VII: Internet Protocol Routing 721
AlliedWare Plus
Command
Syntax
interface Default_VLAN
no ip address
Mode
VLAN Interface mode
Description
This command can only be used to delete the VLAN1-0 interface in the
Default VLAN. To delete any other interfaces in the Default VLAN or in any
other VLAN,. use the standard command.
Example
This example deletes the VLAN1-0 routing interface from the
Default_VLAN:
awplus> enable
awplus# configure terminal
awplus(config)# interface Default_VLAN
awplus(config-if)# no ip address