Allied Telesis AT-S63 - Manual (Page 577)

AT-S63 Management Software Command Line User’s Guide
Section V: Spanning Tree Protocols 577
PURGE STP
Syntax
purge stp
Parameters
None.
Description
This command returns all the STP bridge and port parameters to the
default settings. STP must be disabled in order for you to use this
command. To disable STP, see “DISABLE STP” on page 575.
Example
The following command resets the STP parameter settings to their default
values:
purge stp
Equivalent Command
set stp default
For information, see “SET STP” on page 578.