Alliedware plus command – Allied Telesis AT-S63 User Manual
Page 746
Chapter 38: Internet Protocol Version 4 Packet Routing Commands
746
Section VII: Internet Protocol Routing
its IP configuration from a DHCP or BOOTP server, but the server has
not responded.
NetMask - The interface’s subnet mask. The subnet mask is assigned
manually to the interface or automatically by a DHCP or BOOTP
server. If the mask is 0.0.0.0, the DHCP or BOOTP server has not
responded.
RipMet - The hop count for this interface when routing packets with
RIP.
Examples
This command displays all the routing interfaces on a switch:
show ip interface
This command displays just the VLAN2-6 interface:
show ip interface=vlan2-6
AlliedWare Plus
Command
Syntax
show ip interface brief
Modes
User Exec mode and Privileged Exec mode
Description
This AlliedWare Plus command is equivalent to the standard command.
Example
awplus# show ip interface brief