Show garp machine, Alliedware plus command – Allied Telesis AT-S63 User Manual
Page 680
Chapter 35: GARP VLAN Registration Protocol Commands
680
Section VI: Virtual LANs
SHOW GARP MACHINE
Syntax
show garp=gvrp machine
Parameter
garp
Specifies the GARP application to be displayed.
GVRP is the only GARP application supported by the
AT-9400 Switch.
Note
The online help for this command contains an STP option. This
option is not supported.
Description
This command displays the following parameters for the GID state
machines for the GARP application. The output is shown on a per-GID
index basis; each attribute is represented by a GID index within the GARP
application.
VLAN
Port
App
Reg
Example
The following command displays GID state machines for all GARP
applications:
show garp=gvrp machine
AlliedWare Plus
Command
Syntax
show gvrp machine
Modes
User Exec mode and Privileged Exec mode
Description
This AlliedWare Plus command is identical to the standard command.
Command
Available
AlliedWare Plus