Allied Telesis AT-S63 - Manual (Page 486)

Chapter 27: Multicast Listener Discovery (MLD) Snooping Commands
486 Section III: Snooping Protocols
DISABLE MLDSNOOPING
Syntax
disable mldsnooping
Parameters
None.
Description
This command deactivates MLD snooping on the switch.
Example
The following command deactivates MLD snooping:
disable mldsnooping
Equivalent Command
set ipv6 mldsnooping snoopingstatus=disabled
For information, refer to “SET IPV6 MLDSNOOPING” on page 488.
AlliedWare Plus
Command
Syntax
no ip mld snooping
Mode
Configure mode
Description
This AlliedWare Plus command is equivalent to the standard command.
Example
awplus> enable
awplus# configure terminal
awplus(config)# no ip mld snooping
Command
Available
AlliedWare Plus