Allied Telesis AT-S63 - Manual (Page 37)

AT-S63 Management Software Command Line User’s Guide
Section I: Basic Operations 37
AlliedWare Plus™ Command Line Interface
The following sections describe the features and characteristics of the
AlliedWare Plus™ interface.
Command Modes The AlliedWare Plus interface has a very different structure from the
standard command interface. Instead of a flat command structure, it has
different modes that are arranged in the hierarchy illustrated in Figure 6.
Figure 6. Command Modes
All of the modes have different commands and support different
management functions. The only exception is the Privileged Executive
mode, which supports all the same functions as the User Executive Mode,
plus quite a few others.
Before you can perform a management function, you have to move to the
mode that has the appropriate commands. For instance, to configure the
parameter settings of the ports on the switch, such as the speeds and
duplex modes, you have to go to the Interface mode because that’s the
mode that has the commands for configuring the port parameters.
Privileged
Executive
Mode
User
Executive
Mode
Configure
Terminal
Mode
Multiple
Tree Mode
Spanning
Class-Map
Mode
Other
Modes
Port
Mode
Interface
Line
Mode
Console
Policy Map
Mode
Class
Mode
VLAN
Configuration
Mode