Allied Telesis AT-S63 - Manual (Page 679)

AT-S63 Management Software Command Line User’s Guide
Section VI: Virtual LANs 679
SHOW GARP GIP
Syntax
show garp=gvrp gip
Parameter
garp Specifies the GARP application to be displayed.
GVRP is the only GARP application supported by the
AT-9400 Switch.
Note
The online help for this command contains an STP option. That
option is not supported.
Description
This command displays the following parameters for the GIP-connected
ring for the GARP application:
 GARP Application
 GIP contact
 STP ID
Example
The following command displays the GIP-connected ring for all GARP
applications:
show garp=gvrp gip
AlliedWare Plus
Command
Syntax
show gvrp applicant
Modes
User Exec mode and Privileged Exec mode
Description
This AlliedWare Plus command is identical to the standard command.
Example
awplus# show gvrp applicant
Command
Available
AlliedWare Plus