Purge mgmtacl – Allied Telesis AT-S63 User Manual
Page 906
Advertising
Chapter 49: Management Access Control List Commands
906
Section IX: Management Security
PURGE MGMTACL
Syntax
purge mgmtacl
Parameters
None.
Description
This command deletes all the access control entries from the
Management ACL.
Note
If you delete all the ACEs while remotely managing the unit from a
Telnet management session, your management session will end
and you will be unable to reestablish it if the Management ACL is
active. To continue managing the unit, start a local management
session or a remote SSH management session.
Example
The following command deletes all the ACEs from the Management ACL:
purge mgmtacl
Advertising