Alliedware plus command – Allied Telesis AT-S63 User Manual
Page 429
Advertising
AT-S63 Management Software Command Line User’s Guide
Section II: Advanced Operations
429
AlliedWare Plus
Command
Syntax
group link control upstream|downstream
group
Mode
Port Interface mode
Description
This AlliedWare Plus command is equivalent to the standard command.
Examples
This command adds port 12 as an upstream port to group 1:
awplus> enable
awplus# configure terminal
awplus(config)# interface 12
awplus(config-if)# group link control upstream 1
This command adds ports 12 to 15 as downstream ports to group 2:
awplus> enable
awplus# configure terminal
awplus(config)# interface 12-15
awplus(config-if)# group link control downstream 2
Advertising