Allied Telesis AT-S63 - Manual (Page 667)

AT-S63 Management Software Command Line User’s Guide
Section VI: Virtual LANs 667
Mode
Configure mode
Description
These AlliedWare Plus commands are identical to the standard command.
Example
This example activates GVRP:
awplus> enable
awplus# configure terminal
awplus(config)# gvrp enable
This example activates GIP:
awplus> enable
awplus# configure terminal
awplus(config)# gvrp applicant state active
This example also activates GIP:
awplus> enable
awplus# configure terminal
awplus(config)# gvrp dynamic-vlan-creation enable