Allied Telesis AT-S63 - Manual (Page 247)

AT-S63 Management Software Command Line User’s Guide
Section I: Basic Operations 247
DISABLE LINK-FLAP
Syntax
disable link-flap
Parameters
None.
Description
This command is used to disable link-flap protection on the switch. This is
the default setting.
Example
disable link-flap
AlliedWare Plus
Command
To disable link-flap protection with the AlliedWare Plus commands, use
the NO LINK-FLAP PROTECTION command and remove all of the ports
from the feature. For instructions, refer to the AlliedWare Plus command in
“DELETE LINK-FLAP” on page 246.
Command
Available
AlliedWare Plus