Allied Telesis AT-S63 - Manual (Page 823)

AT-S63 Management Software Command Line User’s Guide
Section VIII: Port Security 823
dot1x supplicant-params held-period 0- 65535
dot1x supplicant-params max-start 1-10
dot1x supplicant-params username
username
dot1x supplicant-params password password
Mode
Port Interface mode
Description
These AlliedWare Plus commands are equivalent to the standard
command. However, the STARTPERIOD parameter can not be set with
the AlliedWare Plus commands.
Examples
This example sets ports 5 and 12 to the supplicant role:
awplus> enable
awplus# configure terminal
awplus(config)# interface 5,12
awplus(config)# dot1x port-control supplicant
This example sets port 21 to the supplicant role and changes the
authentication period to 60 seconds:
awplus> enable
awplus# configure terminal
awplus(config)# interface 21
awplus(config)# dot1x port-control supplicant
awplus(config)# dot1x supplicant-params auth-period 60
This example removes port-based access control from ports 15 to 18:
awplus> enable
awplus# configure terminal
awplus(config)# interface 15-18
awplus(config)# no dot1x port-control