Allied Telesis AT-S63 - Manual (Page 95)

AT-S63 Management Software Command Line User’s Guide
Section I: Basic Operations 95
SHOW CONFIG INFO
Syntax
show config info
Parameters
None.
Description
This command displays the settings of all the switch parameters, including
those not yet saved to the active boot configuration file.
Example
The following command displays all the parameter settings on the switch:
show config info
AlliedWare Plus
Command
Syntax
show running-config
Modes
User Exec mode and Privileged Exec mode
Description
This AlliedWare Plus command is equivalent to the standard command.
Example
awplus# show running-config
Command
Available
AlliedWare Plus