Allied Telesis AT-S63 - Manual (Page 800)

Chapter 41: MAC Address-based Port Security Commands
800 Section VIII: Port Security
SHOW SWITCH PORT INTRUSION
Syntax
show switch port= port intrusion
Parameter
port Specifies the port where you want to view the number
of intrusions that have occurred. You can specify
more than one port at a time.
Description
This command displays the number of times a port has detected an
intrusion violation. An intrusion violation varies depending on the security
mode:
 Limited Security Level - An intrusion is an ingress frame with a source
MAC address not already learned by a port after the port had reached
its maximum number of dynamic MAC addresses, or that was not
assigned to the port as a static address.
 Secured Security Level - An intrusion is an ingress frame with a source
MAC address that was not entered as a static address on the port.
 Locked - An intrusion is an ingress frame with a source MAC address
that the port has not already learned or that was not assigned as a
static address.
Example
The following command displays the number of intrusion violations
detected on ports 12 and 21:
show switch port=12,21 intrusion
AlliedWare Plus
Command
Syntax
show port-security intrusion interface port
Modes
User Exec mode and Privileged Exec mode
Description
This AlliedWare Plus command is identical to the standard command.
Command
Available
AlliedWare Plus