Allied Telesis AT-S63 - Manual (Page 588)

Chapter 31: Spanning Tree Protocol (STP) Commands
588 Section V: Spanning Tree Protocols
AlliedWare Plus
Command
Syntax
To display the bridge STP settings:
show spanning-tree detail
To display a port’s STP settings:
show spanning-tree interface port
Modes
User Exec mode and Privileged Exec mode
Description
These AlliedWare Plus commands are identical to the standard command.
Examples
This command displays the bridge STP settings:
awplus# show spanning-tree detail
This command displays the STP settings for ports 1 to 4:
awplus# show spanning-tree interface 1-4