Allied Telesis AT-S63 - Manual (Page 41)

AT-S63 Management Software Command Line User’s Guide
Section I: Basic Operations 41
CONFIGURE TERMINAL Command
You use this command to move from the Privileged Exec mode to the
Configure Terminal mode. The format of the command is:
configure terminal
Figure 9. Moving from the Privileged Exec Mode to the Configure Terminal
Mode with the CONFIGURE TERMINAL Command
CLASS-MAP Command
You use this command to move from the Configure Terminal mode to the
Class-Map mode to create classifiers and flow groups for Quality of
Service policies. The format of the command is:
class-map id_number
Figure 10. Moving from the Configure Terminal Mode to the Class Map
Mode with the CLASS-MAP Command
LINE CONSOLE 0 Command
You use this command to move from the Configure Terminal mode to the
Line Console mode to set the console timer, activate or deactivate remote
authentication of manager accounts, and set the baud rate of the terminal
port. The format of the command is:
line console 0
Figure 11. Moving from the Configure Terminal Mode to the Line Console
Mode with the LINE CONSOLE Command
AlliedWare Plus (TM) AT-9448Ts/XP AT-S63
awplus> enable
awplus# configure terminal
awplus(config)#
awplus(config)# class-map 256
awplus(config-cmap)#
awplus(config)# line console 0
awplus(config-line)#