Allied Telesis AT-S63 - Manual (Page 36)

Chapter 1: Overview
36 Section I: Basic Operations
Standard Command Line Interface
The standard command interface has a flat structure. You enter all the
commands at one level.
The account you use to log on determines the commands you can use.
There is a manager account and an operator account. The manager
account gives you access to all the commands while the operator account
restricts you to commands for viewing the parameter settings.
The command prompt indicates whether you logged on as a manager or
an operator. If you are a manager, you’ll see the “#” prompt.
Figure 4. Manager Command Prompt
If you are an operator, you’ll see the “$” prompt.
Figure 5. Operator Command Prompt
Allied Telesis AT-9424T/GB - AT-S63
<No System Name>
#
Allied Telesis AT-9424T/GB - AT-S63
<No System Name>
$