Show link-flap, Alliedware plus command – Allied Telesis AT-S63 User Manual
Page 251
AT-S63 Management Software Command Line User’s Guide
Section I: Basic Operations
251
SHOW LINK-FLAP
Syntax
show link-flap
Parameter
None.
Description
This command displays the status of link-flap protection on the switch, the
ports of the feature, and the configuration settings. Here is an example of
the information this command displays.
Figure 47. SHOW LINK-FLAP Command
Example
show link-flap
AlliedWare Plus
Command
Syntax
show link-flap
Mode
User Exec mode and Privileged Exec mode
Description
This AlliedWare Plus command is equivalent to the standard command.
Example
awplus# show link-flap
Command
Available
AlliedWare Plus
Link Flap Protection ............ On
Link Flap Member(s) ............. 1.1-1.17
Duration ........................ 60
Rate ............................ 8