Alliedware plus commands – Allied Telesis AT-S63 User Manual
Page 827
AT-S63 Management Software Command Line User’s Guide
Section VIII: Port Security
827
Examples
The following command displays the 802.1x authenticator ports:
show portaccess=8021x
The following command displays the MAC address-based authenticator
ports:
show portaccess=macbased
AlliedWare Plus
Commands
Syntax
To display the settings of the RADIUS client:
show dot1x
statistics
To display information about the 802.1x authenticator ports:
show dot1x
interface
[port]
To display information about the MAC address-based authenticator ports:
show auth-mac interface port
Modes
User Exec mode and Privileged Exec mode
Description
These AlliedWare Plus commands are equivalent to the standard
command.
Example
awplus# show dot1x statistics
awplus# show dot1x interface
awplus# show auth-mac interface 1-4