Allied Telesis AT-S63 - Manual (Page 172)

Chapter 8: Port Parameter Commands
172 Section I: Basic Operations
Mode
Port Interface mode
Description
These AlliedWare Plus commands are equivalent to the standard
command.
Examples
This example activates the ingress broadcast filter on ports 18 and 21.
The ports discard all ingress broadcast packets:
awplus> enable
awplus# configure terminal
awplus(config)# interface 18,21
awplus(config-if)# filtering broadcast ingress
This example activates the unknown egress multicast filter on port 4:
awplus> enable
awplus# configure terminal
awplus(config)# interface 4
awplus(config-if)# filtering multicast egress
This example activates the unknown ingress unicast filter on ports 2 to 7:
awplus> enable
awplus# configure terminal
awplus(config)# interface 2-7
awplus(config-if)# filtering dlf ingress
This example disables the ingress broadcast filter on port 8:
awplus> enable
awplus# configure terminal
awplus(config)# interface 8
awplus(config-if)# no filtering broadcast ingress
This example disables the unknown egress multicast filter on ports 15 and
17:
awplus> enable
awplus# configure terminal
awplus(config)# interface 15,17
awplus(config-if)# no filtering multicast egress