Alliedware plus command – Allied Telesis AT-S63 User Manual
Page 204
Chapter 10: MAC Address Table Commands
204
Section I: Basic Operations
The following command displays the MAC addresses learned on the ports
in the Sales VLAN:
show switch fdb vlan=sales
The following command displays the static MAC addresses on port 17:
show switch fdb port=17 type=static
The following command displays the MAC address table for a switch with
the stack ID 2 in an AT-9400 Stack:
show switch fdb module=2
AlliedWare Plus
Command
Syntax
show mac address-table
Modes
User Exec mode and Privileged Exec mode
Description
This command is equivalent to entering the SHOW SWITCH FDB
command without any parameters. It displays all the MAC addresses in
the MAC address table of a stand-alone switch or a master switch in an
AT-9400 Stack. The aging timer is displayed at the bottom of the list of the
MAC addresses.
Example
awplus# show mac address-table