Destroy qos flowgroup, Alliedware plus command – Allied Telesis AT-S63 User Manual
Page 401
AT-S63 Management Software Command Line User’s Guide
Section II: Advanced Operations
401
DESTROY QOS FLOWGROUP
Syntax
destroy qos flowgroup=
id_number
Parameter
flowgroup
Specifies the ID number of the flow group you want to
delete. You can delete more than one flow group at a time.
You can specify the flow groups individually, as a range, or
both.
Description
This command deletes flow groups.
Examples
This command deletes the flow group 22:
destroy qos flowgroup=22
This command deletes the flow groups 16 to 20 and 23:
destroy qos flowgroup=16-20,23
AlliedWare Plus
Command
Syntax
no class-map
id_number
Mode
Configure mode
Description
This AlliedWare Plus command is equivalent to the standard command.
Example
This command deletes flow groups 3 and 4:
no class-map 3,4
Command
Available
AlliedWare Plus