Disable authentication, Alliedware plus command – Allied Telesis AT-S63 User Manual
Page 888
Chapter 48: TACACS+ and RADIUS Commands
888
Section IX: Management Security
DISABLE AUTHENTICATION
Syntax
disable authentication
Parameters
None.
Description
This command disables TACACS+ and RADIUS manager account
authentication on a switch or stack. When you disable authentication you
retain your current authentication parameter settings.
Note
This command applies only to the TACACS+ and RADIUS manager
accounts. Disabling authentication means that you must use the
default manager accounts of manager and operator to manage the
switch. This command does not affect 802.1x port-based access
control.
Example
The following command disables TACACS+ and RADIUS manager
account authentication on the switch:
disable authentication
AlliedWare Plus
Command
Syntax
login local
Mode
Line Console mode
Description
This AlliedWare Plus command is identical to the standard command.
Example
This example disables manager account authentication on the switch:
awplus> enable
awplus# configure terminal
Command
Available
AlliedWare Plus